Small Volume Hydranulic Pile Breaker Universal Light Weight 34.3Mpa
SP500 Hydraulic pile breaker which can break square pile
(400-500mm) with 4pcs of moduel.
1.Max drill rod pressure: 690kN
2.Max cylinder stroke: 180mm
3.Max cylinder pressure: 34.3MPa
4.Max sigle cylinder flow: 25L/min
5.Quanity/8h: 40-100 pcs/8h
6.Single cut pile height≦300mm
7.One-piece moudule weight: 2800kgs
8.One-piece moudule size: 908x680x380mm
9.Total weight: 2.8t
The cylinder is installed from the structural part’s top to its
end. The force goes to the whole structural parts, protect the bolt
from breaking off.
The alloy bit and cylinder are connected in the middle of the alloy
bit. Uniformly forced, the machine won’t be damaged during working.
The material of our alloy bit is military use alloy steel, with
higher strength and longer using life, it can cut 5000 nos. of
Chain: Professional hoisting chain with single lifting capacity of
5t, diameter 14mm,offering high safety guarantee. Equipped with
adjusting buckles, the chain’s length could be adjusted according
to jobsite condition easily
Structural parts—Both the material and techniques are more matured,
with high standard quality control and long service life.
The two pins are used for fixing the modules and have the limit
role, which is not only instead of top metal ring frame to reduce
weight of the whole machine, but also avoid the pile colliding the
top metal ring frame during the pile breaking.
|Maximum Drill rod pressure||320KN|
|Maximum strake of hydraulic cylinder||150mm|
|Maximum pressure hydraulic cylinder||34.3Mpa|
|Maximum flow single cylinder||25L/min|
|Cut the number of pile/8h||120|
|Height for cut pile each time||≤300mm|
|Supporting the digging machine tonnage (excvavtor)||≥15t|
|One piece module weight||200kg|
|One piece module size||595x980x275|
|work status dimensions||1710x1710x2500|
|Total pile breaker weight||960kg|