XY-1 Core Crawler Water Well Drilling Rig SNR-350B , Horizontal
Rotary Drilling Rig
1. Power system is that diesel engine driven hydraulic system.
Running, rotating, feeding, lifting, legging,
hoisting, unloading are all controlled by hydraulic units. Using
DTH for rock drilling, driven and discharged
by air compressor.
2. Optional equipped with mud pump for discharging while cutting or
roller drilling .
3. Working device is composed of feeding mechanism, carriage(mast),
top driven rotating head, slider,
centralizer, rod unloading device, winch system, etc.
4. Top driven rotating machine can reach the two types of torque
and rotating speed of equal power, low
speed with high torque and high speed with low torque, which is
realized by the hydraulic manifold block to
meet different work conditions and hole diameters.
5. SNR50B rig applies higher mast with longer pull stroke, as this
result which can use 4.5m drilling rod, as
the same time, it also can match bigger winch to directly use 6m
6. Rotary head can remove out drilling axis by overturning, which
is to casing drilling by winch.
7. Feeding type is cylinder leaf chain type, which is reliable and
8. Roller skid is durable.
9. Axis pressure, feeding speed and rotating speed is adjustable.
10. Crawler type running structure, moving easily. Adopt crawler
undercarriage and steel track shoe.
(optional rubber block for road running). Standard equipped with
four long legs, it can easily move to
truck without crane while transport for long distance.
11. Four hydraulic legs for adjusting whole machine stability in
12. Auxiliary winch can lift goods within 1 T, (such as drilling
tools, spare parts, etc) It also can assist
erection and unload drilling rod and tools. Additionally, it also
can match bigger winch, lifting force get
to 4T, wire line get to 60m, which can assist to lift and casing
13. Fixed skid with machine in working condition is to increase the
14. Supplied gradient and special centralizer can ensure vertical
and accuracy of opening hole.
15. When using down the hammer drill, pressure system with special
oil sprayer can lubricate DTH, so
as to extend using life of DTH.
XY-1 Core Crawler Drilling Rig
Spindle max pull force
Hoist max lift capacity(single rope)
Rig weight(without power unit)
SNR-350B Mud pump
Max Drilling Depth
Initial Hole Diameter
Working Air Pressure
Drilling Rod Length
Drilling Rod Diameter
Reverse Circulation Appliance
Slow Lifting Speed
Slow Feeding Speed:
Rapid Lifting Speed
Rapid Feeding Speed
Big Service Winch
Small Service Winch
BW600/10 or BW450
Long Stroke For Support Legs
Loosen Bed And Bed Rock
Mud Drilling System Or DTH Drilling System
Middle Air Pressure Or High Air Pressure
BW600/10 Mud pump
Horizontal, triplex, reciprocating acting piston pump
Inside diameter of suction hose
Inside diameter of discharge
we can supply you complete drilling tools . including drilling rod
,drilling bits, DTH, Air compressor ,drilling
collar, for option.